ProgrammerSought

Tianmin TM8 firmware download tutorial: Click the buy rom button above to get it

The brushing method of Tianmin TM8 set-top box is as follows:

1. Prepare the USB cable at both ends for brushing, and a tool such as a toothpick to poke the reset hole.

2. Download the flashing tool and the four files in the image file (H3 flashing tool and steps), which are 1. flashing tool installation steps, 2. flashing steps, PhoenixSuit_CN.msi and the firmware with the suffix .img

, and download it to your computer desktop. (The firmware with the suffix .img is an image file. If it is downloaded as a compressed package, it does not need to be decompressed)

3. Then open the flashing tool, and then click Next until the installation is complete. After the installation is complete, there will be an icon of the flashing tool on the desktop (if the flashing tool cannot be installed or cannot be opened, please refer to the installation steps of the flashing tool again)

4. The computer installs the flashing tool to the computer, and flashes the firmware, and then selects one-click flashing. If you are prompted to upgrade after opening, please upgrade the flashing tool before operating!

5. Click one button to flash, then click Browse to select the firmware for flashing: name the firmware with the suffix .img (do not connect the computer to the machine before selecting the firmware file)

6. After selecting the firmware for flashing, use a toothpick against the reset hole of the set-top box.

Then connect the computer and the set-top box to the USB interface on the set-top box with two cables with both USB interfaces. Select the USB interface next to the network cable interface.

7. Hold the reset hole first, and then connect it to the computer with a USB cable.

(Note: The reset hole cannot be released when the USB cable is connected to the computer, keep pressing it!)

The box will automatically detect the flash firmware of the computer, and it will prompt whether to force the format.

As shown in the picture below, when prompted, you can pull out the toothpick.

If the connection fails, please do it again! Select "Yes" in the pop-up box on the computer side, and then you can see the flashing progress bar. Some computers will prompt an external device when the USB interface is connected, asking for installation, then you need to click to install. first brush

Note: The first flashing time will be about 18 seconds, prompting to unplug the USB cable plugged into the set-top box after the programming is successful.

Then carry out the second brushing, the brushing steps are the same! The second brushing

Note: The second flashing time is about 3 minutes and 10 seconds, please be patient! You can unplug the data cable to connect to the TV and turn it on after prompting that the firmware is successfully written.

The first time you turn on it, it will stay on the boot screen for 10 to 20 minutes before entering the system, please be patient! Note: A If the machine is pressing the reset hole and connecting the USB cable at the same time, it does not prompt whether it is forced to format in step 7.

That means, the set-top box must be powered on before performing the above steps. B. Note that brushing needs to be done twice, the first time is relatively short, and the second time is relatively long.

If there is a prompt that the flashing machine fails, please flash the machine several times.

The above is about the flashing tutorial of Tianmin TM8 network set-top box. Thank you for your support to Kylin flashing network!

Warm reminder and disclaimer:

1. Brushing is risky, and you need to be cautious. szjytx.com is not responsible for any machine failures caused by flashing!

2. All software copyrights on this site belong to the software authors, and we only provide download services.

3. The software is limited to personal packaging technology research and communication use, please delete it within 24 hours after downloading, and do not use it for commercial purposes.

4. If you have downloaded the firmware or tutorial on this page, it means that you have fully understood the statements and reminders of this site.

___ Any and all problems and consequences arising from this will be borne by you.

5. The software provided by this site comes from the Internet or provided by netizens. If the program involves or infringes on your copyright, please write to us immediately to notify us to delete it.

___The email address of this site is admin#szjytx.com, replace # with @[Please provide detailed supporting materials in the letter, we will remove the relevant infringing content after strict review]